How to Disassemble your Pool Table

A pool table is a large piece of furniture. It is also very difficult to move when the time comes to do so. In order to make the moving process easier, many owners disassemble their pool tables before making a long move or placing them into storage. This allows the table to be stored in a smaller space and assists in the logistics of transportation. As a do-it- yourself project, it's not for everyone. You need to have an intimate knowledge of your pool table to do it correctly. Does this Spark an idea?

Instructions

1

Remove the pockets by pulling out the staples holding the pocket strapping in place (this step is only for exterior pocket tables). Then remove the bolts securing the rails to the table. Slide out the side rail bolts and remove them one by one.

2

Remove the pool table felt by prying up the staples securing the felt to the table along the sides of the table--or simply pull up the felt if it is glued in place. The felt will pull off of the table slate.

3

Remove the slate from the table by locating the slate mounting screws and loosening them. Many screws are recessed and hidden by a wax or wax-like covering. To access them, insert a screwdriver into the wax and remove it from the hole, then loosen the screws.

4

Take the legs off of the table by loosening the bolts that secure the legs to the frame. This requires a wrench (either a socket or traditional hex head). Slide off each bolt while supporting the table, then remove the legs one at a time. This requires a lot of help from friends to complete.