Instructions on How to Disassemble a Pool Table

If you are relocating, taking apart your pool table for transporting is one option. However, most experts recommend moving a pool table while it is still fully assembled. Some skill with tools is necessary to break down a pool table, as well as some familiarity with the table's construction. Without these, you stand a good chance of damaging the table. But if you must disassemble your pool table, it can be done in a few basic steps. Does this Spark an idea?

Instructions

1

Position yourself beneath the table so that you can easily reach the underside. Pry out each of the staples securing the pockets to the table top with the edge of a flathead screwdriver. Twist each of the bolts securing the pool table rails counter-clockwise with a socket wrench to loosen them; finish removing the bolts by hand.

2

Move to the side of the table and remove each of the rails from the table top. Pull out the staples holding down the pool table felt along each side with a staple puller. Peel the felt off of the slate gently, roll it up and set it aside in a safe place.

3

Attach the screw bit to the drill. Completely unscrew each screw holding the slate to the table. Lift the slate off of the table (with help) and wrap it in shipping padding or blankets to protect it during transport.

4

Carefully turn the table over completely so that the legs stick straight up. Remove the screws holding each leg to the frame and lift the legs away one at a time. Place each leg in a safe place to avoid scratches.