How to Build a Serving Tray

Building a customized serving tray for parties is an easy task if you have the right materials. One way to create a serving tray is by using materials around you, such as old picture frames and cabinet handles. You can also purchase these materials new in any craft store.

Instructions

Drilling

1

Remove the glass and backing from the picture frame so neither gets damaged.

2

Measure and mark the ends of the frame that coincide with the measurements of the handles. These will be your guides when attaching the cabinet handles.

3

Using a drill bit slightly smaller than the screws, pre-drill holes in the marks you just made. This will make it much easier to drill in the screws, and it will keep the wood from splitting.

4

Choose screws that will go the entire depth of wood of the frame, for as much reinforcement as possible.

5

Screw the cabinet handles into place.

Finishing

6

Line the picture frame backing with decorative fabric and glue it into place. Let dry.

7

Put the glass back into the frame and attach the backing with the fabric on it. The tray will now have a glass top with a decorative background.

8

Reinforce the back by gluing the balsa wood sheet over the back of the frame, sized to fit. Let dry before serving food.